The change Drum Soon Error in Brother DR3000 Drum Unit cause due to drum counter not been setup or not replace it properly. Please follow the below steps to Fix Change Drum Soon Error in Brother DR3000 Drum Unit by Brother Printer Support.
Steps to Fix Change Drum Soon Error in Brother DR3000 Drum Unit
Step 1: Essentially to continue working with the present drum unit to the extent that this would be possible.
Step 2: Make a point to supplant the DR3000 and reset the counter once, it is discovered that its quality has started weakening.
Step 3: If user wants to re-set the counter then first open the front cover of your printer device.
Step 4: Important thing is to carefully remove the drum unit to avoid any damages of your product.
Step 5: Gently reinstall the Brother Printer device drum unit.
Step 6: Push the clear/back button key from the printer device.
Step 7: Gently hold the key 1 button for 30 seconds to reset the counter.
Step 8: After that close the Brother Printer device front cover properly.
Step 9: Once you close the front door your device counter will be fully reset it.
Step 10: Make sure user have a proper knowledge while changing the toner cartridges.
Step 11: However; it is a different issue to replace the DR300 drum unit from your device.
Step 12: If you’re Brother Printer devices do not have a numeric keypad option.
Step 13: Then use an up arrow option key to reset the drum counter of your machine.
Step 14: Use only genuine Brother Printer product drum units or toner cartridges as well to avoid the issue.
Step 15: Also, would like to share the layout of your control panel differs; it depends on the model to model.
Step 16: Moreover the alternative button is located on the near side of the LCD screen as shown of your product.
If user still notable to rectify the Drum Soon Error in Brother DR3000 drum unit, we suggest you to take an expert advice by dialing the Printer Toll free Number 1-800-576-9647 to Fix Change Drum Soon Error in Brother DR3000 Drum Unit.