The Epson XP-400 End of Service Life Error usually appears due to red light blinking issue which collects waste ink while cleaning and printing job is being performed mode. To Fix Epson XP-400 End of Service Life Error, contact with Epson Printer Support experts.
Steps to Fix Epson XP-400 End of Service Life Error
Step 1: Initially user needs to connect the Epson XP 400 printer via USB cord with your pc (computer or laptop).
Step 2: Switch on your printer until your device heat up or ready mode.
Step 3: Re-set the all required software from your device.
Step 4: Check the counters by tapping on the Read waste counters and play out an intensive check of the page counters of the Epson printer pursued by tapping on “Reset waste counters” symbol to finish the procedure.
Step 5: After that enter the re-set key and push on OK button key.
Step 6: Push on OK after completing the reset process.
Step 7: Then switch off your device and turn it on again.
Step 8: Also, when ink pad reaches the end, then Epson XP-400 device send the warning message and refuse to function anything further.
Step 9: Basically waste Ink pads is a huge collection of sponge pads inside of your printer device.
Step 10: In a simple way responsible for Absorbing and collecting the waste material.
Step 11: That time simply adjust the unused ink while processing and printing and clean the print-head.
Step 12: When ever user faces the issue like this kindly, clean the print head and remove the wastage.
Step 13: On that time your printer will automatically stop.
Step 14: If user faces the issue like this so, without wasting the single moment user needs to quickly fix the problem.
After following the all instructions, if you still facing the same problem to Fix Epson XP-400 End of Service Life Error, so get in touch with Printer Support Number 1-800-576-9647 and get instant help.