If Error Code 0xc18a0406 appears on your HP Photosmart 3210 printer or another model such as 3210, C5180 or C7280 device which defined ink system failure. In that case you can switch off the printer then turn it on so, may be problem would be resolve, if not please follow the below options to Fix HP Printer Error Code 0xc18a0406 by Printer Customer Support Service.
Steps to Resolve HP Printer Error Code 0xc18a0406
Step 1: First push the switch on button to turn it off your device.
Step 2: Carefully unplug the power cable from the device.
Step 3: Also, remove the ink cartridges from your device.
Step 4: Leave your printer for 10 minutes.
Step 5: Then carefully attach the all power cables to your printer.
Step 6: After that turn it on your device.
Step 7: Then Install the ink cartridges properly to your device.
Step 8: The printer lights may streak, and the carriage may move.
Step 9: Hold up until the warm-up period completes and your printer is inactive and quiet before you continue.
Step 10: Turn on the printer and after that paper into the info plate.
Step 11: On the printer control board, tap the correct bolt.
Step 12: Tap Setup.
Step 13: The Setup Menu shows.
Step 14: Tap the down bolt, and after that tap Reports.
Step 15: Tap Printer Status Report.
Step 16: While troubleshooting does not print.
Step 17: Recognize the present firmware form on the Printer Status Report.
Step 18: Look at the adaptation accessible on the web to the Printer Status Report.
Step 19: On the off chance that the adaptation coordinates your printer status report, proceed to the following stage.
Step 20: Now try to use your printer, if the error code not displaying on your device, so the issue is resolved.
And if the issue is still persists before spending the hours on reading and searching online articles. I recommend you to contact Our HP Printer support by dialing the HP Printer Contact Number 1-800-576-9647 to Fix HP Printer Error Code 0xc18a0406 instantly.