Steps to Fix HP Printer Ink System Failure Error Code 0xc18a0206?

HP Printer Error Code 0xc18a0206 occurs due to Ink System Failure or may be printhead failure issue. To Fix HP Printer Ink System Failure Error Code 0xc18a0206, contact with our well trained HP Printer Technical Support experts.

Fix HP Printer Ink System Failure Error Code 0xc18a0206

Easy Steps to Fix HP Printer Ink System Failure Error Code 0xc18a0206

Step 1: First disconnect the all power cable of your printer.

Step 2: Wait for 10 to 20 seconds and plug the all cable to your Printer.

Step 3: Wait until printer screen to display the menu.

Step 4: Try to test print (sample print). Or

You can also follow the below steps to Fix HP Printer Ink System Failure Error Code 0xc18a0206 problem.

Step 1: Push * and # key at the same time.

Step 2: Then push 1, 2, 3 and “support R0632M” will display.

Step 3: Push > key and “information menu” will display.

Step 4: Push > key and “configuration menu” will display.

Step 5: Push OK button and “hardware failure status” should display on your computer screen.

Step 6:  Insert your ink cartridges to your printer, and close the ink cartridge door.

Step 7: Switch on your printer, if it will not automatically turn it on printer might be go through a warm-up mode and device lights might be flash.

Step 8: Push OK key “failure status: clear” the push OK key to clear all.

Step 9: Then press Cancel button.

Step 10: Switch off your printer and unplug the all power cable for 2 minutes then plug the all power cable back to turn printer back on. (After the following the steps if the error came back then do the sequence again and error will be replaced with the usual print cartridge initialization screens after that print a test page to make sure it is printing or not).

HP Printer Toll Free Number

After following this process if you are still unable to Fix HP Printer Error Code 0xc18a0206, Call Our HP Printer Toll Free Number 1-800-576-9647 and Resolve your issue instantly.