While using the printer many people reported Error ts-07 with Brother Printers that means your Brother printer not able to detect the WLAN access point or router. Please follow the easy steps to Fix Brother Printer Error ts-07 issue by Printer Support.
Steps to Fix Brother Printer Error ts-07
Step 1: Make sure users know the WLAN access point option or router WPS (Wi-Fi Protected Setup) or AOSS (Air Station One-Touch Secure System).
Step 2: First user needs to configure the Brother Printer with a wireless network setting by using the automatic wireless mode option.
Step 3: User must operate the Brother Printer and the WLAN access point, router as well.
Step 4: If the wireless setting is not activated, so first switch ON the wireless setting from your device.
Step 5: If the Ethernet cord is connected to your device.
Step 6: First user needs to disconnect and turn the wireless setting ON by pressing the down GO.
Step 7: Wait for 20 to 30 seconds.
Step 8: Then leave the GO option.
Step 8: If machine prints the Network Configuration page that means the new network settings is working properly.
Step 9: If the WLAN access point or router is not detecting anything.
Step 10: Be sure that the WLAN access point or router is powered on during configuration.
Step 11: Move your device and also, it would be close to your WLAN access point/router.
Step 12: User can temporarily place the machine location near about one meter from the WLAN access point.
Step 13: If WLAN access point-router is using MAC address, make sure user knows the MAC address as well.
Step 14: If user manually type the SSID and security information (SSID/authentication method/encryption method/Network Key) the information may be not corrected.
Step 15: Then simply re-confirm the SSID and security information and enter the correct information once again, if it’s required.
Step 16: After that push OK and your Brother Printer machine will be select automatically.
Step 17: Carefully configure your WPN access point or router.
Step 18: Once the configuration done, then WLAN shows the report and same will be printed automatically.
Dial Brother Printer Support Number 1-800-576-9647 to Fix Brother Error Code
The above instructions will help you to Fix Brother Printer Error ts-07 issue. If not please dial Brother Printer Toll-Free Number 1-800-576-9647 for further assistance. Our expert team always here to help you.