If your HP Printer Won’t Turn on so, might be your printer not connected with the power cables or may be hardware or software issue. Now we are going to discuss the few possibilities and also, sharing the solution so, users can Fix HP Printer Won’t Turn on Issue by Printer Support experts.
Steps to Fix HP Printer Won’t Turn on Issue
Step 1: First user needs to connect and plug the printer’s cable.
Step 2: Then push and press the power button continuously without releasing the power key.
Step 3: While pushing the power button, if in case your printer device is not switching on.
Step 4: Then user needs to disconnect the power supply from the printer.
Step 5: If you find is the problem is related to power module.
Step 6: Then carefully connect the required power cables to the power outlet.
Step 7: Now connect the power plug to the HP printer device.
Step 8: If user thinks defective USB is the main cause, so replace the USB cable.
Step 8: It is also depend on your make and model of your printer device.
Step 9: Before following the steps make sure check your printer properly.
Step 10: If the printer access door is open so, kindly close the access door first.
Step 11: Try to re-start your printer and unplug the all power cables.
Step 12: Leave your device for 60 minutes.
Step 13: Then re-plug the all power cables.
Step 14: If user using the large printer then user can find the power cable behind the printer.
Step 15: Also, if user using the AC adapter so may be cable would be removable.
Step 16: If the problem is related to cable or plugs so, user needs to change the plugs and cables.
Step 17: Also, if the power voltage is low that could be the cause of defective wiring.
If your printer still not switch on then give us a ring on HP Pinter support Number 1-800-576-9647 to Fix HP Printer Won’t Turn on Issue instantly.